Atlas pressure regulators are accurate instruments. It is designed to reduce the output pressure of the gas cylinder to a safe range before it flows out, so that the outflow gas pressure is restricted within the safe range to prevent any instrument or device from being damaged by overpressure. At the same time, the gas flow pressure is stable.
Genuine Atlas Copco Pressure Regulator Performance
① The input gas of the gas cylinder changes the pressure, and the output gas pressure of the regulator can maintain normal pressure.
② The pressure regulator does not change the pressure due to the change of the gas output speed, the deviation is small, and the constant pressure is basically maintained.
③ When stopping work, the final pressure in the system will not increase.
The role of Atlas pressure regulator is to keep the fuel pressure constant relative to the atmospheric pressure or the negative pressure of the intake pipe, that is, to keep the difference between the fuel injection pressure and the fuel injection environment pressure constant. The fuel injection quantity required by the EFI engine is controlled according to the length of time the ECU adds to the fuel injector. At this time, the oil pressure must be limited, otherwise, for the same energizing time, if the oil pressure is high, the oil injection will be more, and if the oil pressure is low, the oil injection will be less. Only when the fuel injection pressure is constant, can the power-on time be long, the fuel injection volume is large, the power-on time is short, and the fuel injection volume is small.
Learn more different valves in air compressors.
Note: Based on our field experience and accrued internal information, all references, technical information and recommendations here are in good faith and reliable. However buyer should be cautioned, that AirCompressorsTrade cannot guarantee the completeness or accuracy of this information,the customer should be responsibile to determine the suitability of specific products in any given scenarios.