1616761280 – 1616761290 Atlas Copco Screw Element by Reliable Supplier
1. Using the standard Atlas Copco profile (SAP), the rotor adopts a 4/6 tooth combination, and the rotor diameter is equal. Compared with the 5/6 tooth (Sigma) or 4/5 tooth (Cyclone) combination, the female rotor has higher rigidity, So it is not easy to deform, and the internal leakage loss is small.
2. SAP profile: due to compression force, it contacts the rear edge of the tooth side. The gap of the rotor seal line is small. The outlet hole at the exhaust end is small (small leak triangle). Small internal leakage and loss. Higher internal pressure ratio (10 bar). Improved efficiency, especially in 10 and 13-bar models, which have larger rotor diameters and low tip speeds.
3. Effective, reliable, and long-life oil seals and gas seals after more than 40 years of continuous improvement and the test of time. It is composed of oil seal C with reverse thread and two stainless steel gas seals B. These oil seals and air seals maintain a small gap with the shaft but do not contact, and their sealing efficiency, reliability, and life are far better than the general labyrinth seals or mechanical seals. There is a small leakage hole E between the oil seal and the gas seal, in case the seal is damaged, it can still provide compressed air.
4. Gearbox: It can reduce energy consumption and costs. The axial force generated by the gear offsets the axial force acting on the male rotor. Direct drive does not have this advantage.
5. Keep the temperature lower.
Atlas Copco Compressor Air End Features:
1. Adopt a 4/6 rotor tooth profile.
2. The gearbox is specially designed to reduce the axial force. Using original imported SKF bearings to ensure service life.
Product advantages: originally imported bearings to ensure the operating life of the host
Product parameters: profile line, using 4/6 teeth
CBN grinding wheel
CNC five-axis linkage rotor grinder
Atlas Copco Air End Maintenance Precautions:
1. Replace the special lubricating oil on time;
2. Regular main engine overhaul and maintenance to improve main engine efficiency;
3. Check whether the bearing coupling and other parts are in good condition before starting the new machine;
4. Pay attention to checking the steering when starting up or changing cables.
Part Numbers List for Atlas Copco Genuine Air end for Screw Air Compressor
1616 7612 80
1616 7612 90
1616 5789 82
1616 6466 80
1616 6575 80
1616 7103 80
1616 7146 83
1616 7281 70
1616 7281 80
1616 7281 90
1616 7345 80
1616 7408 81
1616 7408 91
1616 7409 81
1616 7535 80
1616 7540 80
1625 1641 00
1625 1641 01
1625 1641 02
1625 1641 55
1625 1641 56
1625 1641 57
If you are looking for 1616761280 – 1616761290 Atlas Copco Screw Element. Here is the right page. China Compressors Supplier strives to offer ALL Genuine Original air compressors like Ingersoll Rand, Atlas Copco, Sullair, etc., and the related spare parts. If you need, please rest assured to buy! You will get a good experience if you work with us!
China Air Compressors Trade Service company helps you save time and money when purchasing genuine original Honeywell parts from China. Our company also provides genuine parts for world reputable compressors brands such as Atlas Copco, Ingersoll Rand, and Sullair compressors, vacuum pumps, Epiroc drilling rigs, etc.
Our compressors, spare parts, and tools customers are from around the globe, and here are just a few of them: Armenia, Azerbaijan, Bahrain, Bangladesh, Brunei, Cambodia, Cyprus, South Korea, Indonesia, Iran, Iraq, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Malaysia, Mongolia, Myanmar, Nepal, Oman, Pakistan, Philippines, Qatar, South Korea, Saudi Arabia, Singapore, Syria, Tajikistan, Thailand, Turkey, Turkmenistan, United Arab Emirates, Uzbekistan, Viet Nam, Australia, New Zealand, Papua New Guiana, and African countries such as Nigeria, Kenya, Zambia, South Africa, etc, South American Countries: Brazil, Colombia, Peru, Chile, Argentina, etc., and the USA, Canada, Spain, France, Italy, etc few European countries.